Yamaha QY-300 Owner's Manual page 57

Delete Measure is a
great way to completely
cut out unwanted data
from the song. It's important to
remember, however, that a de-
lete operation affects all tracks
simultaneously, and that meas-
ures following the deleted range
are moved back to take the
place of the deleted measures.
15: Copy Track
First measure
After setting the parameters as required press [ENTER] to execute the Delete
Measure job. The metronome icon will appear on the display while the data is
being processed, then "Completed" will appear briefly when the job is done.
Press the [F6] key ("Exit") to return to the job list, or a mode key to go directly
to the selected mode.
Copies all data from the specified track of a specified song to any other
specified track of a specified song.
The upper "Song" parameter selects the source song — i.e. the song from
which the data is to be copied: "01" ... "10".
The lower "Song" parameter selects the destination song — i.e. the song
to which the data is to be copied: "01" ... "10".
The upper "TR" parameter selects the source track — i.e. the track from
which the data is to be copied: "01" ... "16", "Pat", "Chd" or "Tmp". When
"Pat", "Chd" or "Tmp" is selected the lower "TR" parameter is set to the same
track.
The lower "TR" parameter selects the destination track — i.e. the track to
which the data is to be copied: "01" ... "16", "Pat", "Chd" or "Tmp". When
"Pat", "Chd" or "Tmp" is selected the upper "TR" parameter is set to the same
track.
After setting the parameters as required press [ENTER] to execute the Copy
Track job. The metronome icon will appear on the display while the data is
being processed, then "Completed" will appear briefly when the job is done.
Press the [F6] key ("Exit") to return to the job list, or a mode key to go directly
to the selected mode.
Last measure
M001 ~ 999
The Song Jobs
4 9