About This Guide; Installing The Software - Yamaha mLAN Installation Manual

Installing the software

Explains how to install mLAN Driver/mLAN Tools for the first time.
Setting up from the mLAN Auto Connector
Explains how to connect a computer to an mLAN device (01X, i88X, mLAN16E or MY16-mLAN) via mLAN in a peer-to-peer
connection by using mLAN Auto Connector.
Upgrading the firmware of the mLAN device (01X, i88X and mLAN16E)
Explains how to upgrade the firmware of the 01X, i88X and mLAN16E. An upgrade may be necessary depending on the firmware
version.
Uninstalling the software
Explains how to uninstall mLAN Driver/mLAN Tools.
Updating the software
Explains how to update the old version of mLAN Driver/mLAN Tools that you're currently using to the new version of the soft-
ware. This section also explains how to replace n Driver or AI Driver that you're currently using with mLAN Driver/mLAN Tools.
Troubleshooting (page
Explains how to solve problems that you may encounter while you are using the mLAN devices along with your computer.
CAUTION
• Keep in mind that noise may be generated when installing or uninstalling mLAN Driver/mLAN Tools. Before performing either of these operations,
make sure to lower the output level of each device.
If you have already installed mLAN Driver/mLAN Tools, n Driver or AI Driver on your computer:
You must uninstall the software. During the installation of mLAN Driver/mLAN Tools, a software maintenance window
appears. Follow the instructions in the window to remove the software. The installation of mLAN Driver/mLAN Tools will then
resume. For more information on removing the software, refer to
mLAN Driver/mLAN Tools consists of two software components: mLAN Tools 2.0 and mLAN Applications for Yamaha. mLAN
Tools 2.0 software includes a driver that enables you to connect mLAN devices to a computer. mLAN Applications for Yamaha
enables audio and MIDI signals to be transferred between a computer and mLAN devices via IEEE1394 (mLAN) cables. These
software components enable you to connect the 01X, i88X, mLAN16E, mLAN16E2, MY16-mLAN, n8 or n12 to a computer via
mLAN.
Follow the steps below to install these software.
NOTE
• For explanations of the error messages, see

About this guide

(page 5)
(page 24)
(page 25)
27)
Installing the software
1 Preparing to install
When using Windows XP..............................................
When using Windows Vista ..........................................
2 Starting up the Installer
When using Windows XP..............................................
When using Windows Vista ........................................
3 Confirming the installation and
changing settings after installation...........................
page 27.
(page 16)
page 24 .
page 6
page 9
page 7
page 10
page 12
mLAN Driver/mLAN Tools Installation Guide
(page 23)
5