Related Manuals for FAAC DAAB DB512
Summary of Contents for FAAC DAAB DB512
- Page 1 INSTRUCTION MANUAL DAAB COMMUNICATION CARD DB512 For DAAB EP105 automatic control system FAAC Nordic AB BOX 125, SE-284 22 PERSTORP SWEDEN, +46 435 77 95 00, support@faac.se www.faac.se...
-
Page 2: Technical Data
DAAB COMMUNICATION CARD DB512 INSTRUCTION MANUAL Technical data Dimensions (WxHxD) 70 x 37 x 20 mm Temperature range 0 to 50°C Indications 6x LEDs Degree of protection The circuit board is intended for internal installation in an enclosure Safety instructions See operating manual for automatic control unit EP105. - Page 3 DAAB COMMUNICATION CARD DB512 INSTRUCTION MANUAL Connection To optimise communication between two EP105s, it is important to choose the right cable and to route it correctly. A suitable cable is FQAR-PG 2X0,5, E0182120. Otherwise use a twisted pair shielded cable with a conductor cross sectional area of at least 0.2 mm and a capacitance of 50-70 pF/m.
- Page 4 DAAB COMMUNICATION CARD DB512 INSTRUCTION MANUAL Functions using add-in card DB512 Two EP105s can send interlocks and start signals between each other through communication. Each of the doors must first be commissioned and tested locally in accordance with the DAAB Automatic Control Unit EP105 instruction manual. The terms local door and remote door are used in the text below.
-
Page 5: Channel List
DAAB COMMUNICATION CARD DB512 INSTRUCTION MANUAL Preventing draughts in spaces with two doors, thermal interlock If there is a problem with draughts, doors can be blocked so that only one can be opened at a time. The door will not open before the other linked door is closed.