Advertisement
10.
Remove the 4 flange-head bolts that secure the engine to the swing-arm platform
(Figure
5).
Note:
For assembly purposes, note that the negative battery cable is secured to engine with the left,
front engine fastener.
g484395
Figure 5
1. Flange-head bolt
2. Swing arm platform
11.
Carefully remove the engine from the swing arm and vehicle using an appropriate lifting device.
Important:
Make sure to not damage the engine, fuel hoses, control cables, electrical harness or
other parts while removing the engine.
CAUTION
The engine weighs approximately 34.5 kg (76 lb). Lifting the engine by yourself can cause
personal injury.
To prevent personal injury, ensure that the engine is properly supported with a lifting
device as it is removed from the vehicle.
5
Advertisement
