Advertisement
2
Removing the Existing Engine
No Parts Required
Procedure
1. Fuel-supply hose
2. Exhaust-manifold bolts
3. Oxygen sensor
4. Exhaust assembly
5. Pulse-line filter
1.
Disconnect the accelerator cable from the engine from the ball joint on the throttle lever and remove the
cable from the throttle bracket
2.
Loosen the hose clamp that secures the air-intake hose to the engine and the air-cleaner assembly.
Remove the intake hose
3.
Disconnect the oxygen sensor from the engine wire harness
Figure 3
(Figure
3).
(Figure
3).
6. Pulse hose
7. Accelerator cable
8. R-clamp
9. EVAP hose
10. Air intake (shown removed)
(Figure
3).
3
g483870
Advertisement
