Advertisement
1
Preparing the Machine
No Parts Required
Procedure
1.
Park the machine on a level surface.
2.
Engage the parking brake.
3.
Shut off the engine and remove the key.
4.
Wait for the engine to cool completely.
5.
Disconnect the ground (black) cable from the
battery. Then, disconnect the positive (red)
cable from the battery.
6.
Raise the seat assembly by pushing it forward;
refer to the Operator's Manual.
7.
Raise the cargo bed and secure it in the
service position using the prop rod; refer to the
Operator's Manual.
8.
Remove the rear frame panel cover by releasing
the latches and lifting the cover from the rear
frame
(Figure
2).
1. Panel cover
2. Latch (2)
Figure 2
3. Rear frame
g483813
2
Advertisement
