Advertisement
4.
Remove the 2 flange-head bolts securing the exhaust manifold and gasket. Retain the nuts and remove
the exhaust assembly
5.
Disconnect hoses from the electronic fuel-injected engine
Important:
Record the routing of fuel hoses and hose clamp applications.
A.
Disconnect the fuel-supply hose at the fuel injector.
B.
Disconnect the pulse hose at the pulse-line filter and remove the hose from the R-clamp.
C.
Disconnect the EVAP hose at the throttle body.
6.
Disconnect the machine wire harness from the engine wire harness secured to the left side of the swing
arm under the air-filter assembly.
7.
Remove the CVT drive belt, starter/generator belt, and primary clutch from the engine.
8.
Remove the 2 flange-head bolts that secure the spanner bar to the engine
1. Starter/generator bracket
2. Flange-head bolt
9.
Remove the flange-head bolt that secures the starter/generator bracket to the engine
Figure
3).
(Figure
3):
Figure 4
3. Engine
4. Spanner bar
4
(Figure
4).
(Figure
4).
g484384
Advertisement
