Table of Contents
Advertisement
Placing a test call / How to call for help
1.Press and hold both buttons at the same time on
either side of the Chiptech GO™ . This will start the
short pre-alarm sound and the device will vibrate.
To cancel an alert, you have 10 seconds to press and hold
one of the buttons on the Chiptech GO™ until you hear it
announce "Cancelled"
2.The light-ring around the Chiptech GO™ will turn red.
The device will say: "Help alert in progress" as you wait
a few moments to be connected to our monitoring team.
3.When our team have received your alert a voice
message will play and repeat: "The alert has been
received by monitoring; you will soon be contacted by
an operator."
4.The Chiptech GO™ has a hands-free built-in
speakerphone, so you can talk to our team
directly through the device. When we connect to you,
we will ask you if you are okay and if you need any
assistance.
If you are simply testing your equipment, just let us
know you are making a test call.
Advertisement
Table of Contents
