Flight Mode; Night Mode - TeleCare24 Chiptech GO User Manual

Chiptech GO™ modes

Flight mode

Flight Mode is used to prevent the device from emitting mobile communication signals in
order to comply with aviation regulations. If you catch a flight and you have your Chiptech
GO™ with you, you should put it in Flight Mode while traveling.
To enable Flight Mode, press and hold a single button on either side of the Chiptech GO™
for 10 seconds, until you hear it announce "Flight Mode enabled".
To disable Flight Mode, press a single button on the Chiptech GO™ (this will also start
System Check) or place the Chiptech GO™ on charge.
If you require help and you are not aboard an airplane, press and hold the two buttons on
either side of the Chiptech GO™ to send an alert for help. This will override Flight Mode.
Lost mode
If no movement is detected for 72 hours, the device will send its GPS location to
Telecare24. If you lose your Chiptech GO™ , contact us on 0800 180 82 20. We may be
able to locate your device using GPS.

Night mode

So that you will not be disturbed, the Chiptech GO™ automatically enters Night Mode
between the hours of 9pm and 7am. During this time, voice messages will not sound. If
you send an alert for help, the Chiptech GO™ will operate as normal.