Related Manuals for FLUX POWER X G1 Series
Summary of Contents for FLUX POWER X G1 Series
- Page 1 User Guide Flux Power X-Series-G1 User Guide WARNING – Risk of Fire – No User Serviceable Parts...
- Page 2 User Guide Safety Precautions The Flux Power Lithium-ion Battery is composed of lithium-ion cells and is classified as Class 9 miscellaneous hazardous material. Precautions to correctly handle the Flux Power lithium-ion battery include: • The battery shall only be handled by Flux Power authorized personnel familiar with handling, storing, and the installation of a lithium-ion battery.
-
Page 3: Table Of Contents
LiFT Pack X-Series-G1 Basics .......................4 Construction ...........................4 Initial Startup ..........................5 Charger ............................6 2.3.1 Opportunity Charging ........................6 Flux Power Battery Management System (BMS) ................6 Temperature ..........................6 Storage ............................6 Device Trouble Codes (DTCs) on BDI ....................7 Safety and Reliability ..........................8 Hazardous Material Information ....................9 Cell Exposure ..........................9... -
Page 4: Introduction
The LiFT Pack X-Series-G1 batteries are lithium-ion batteries specialized for the material handling industry. This User Guide is intended to provide information on how to operate a Flux Power LiFT Pack X-Series-G1 battery and maximize its productivity, longevity, and cost savings features. -
Page 5: Initial Startup
ON/OFF Push Button SOC Gauge Charge Port Figure 1: A diagram of the Flux Power LiFT Pack X-Series-G1Lithium Battery and all major components. Refer to the data plate for the service weight of the battery. 2.2 Initial Startup Connect the external harness, as well as any accessories that may have come with it, to the battery before turning it ON. -
Page 6: Charger
2.4 Flux Power Battery Management System (BMS) All of Flux Power’s energy storage solutions use our patented BMS which monitors and protects the life of the battery. The BMS is continuously monitoring cell voltages to properly balance them. Cell balancing is automatically performed when the battery is charging, discharging after charge, or in an idle state after charge. -
Page 7: Device Trouble Codes (Dtcs) On Bdi
DTC. The corresponding Service and Parts Manual for this battery also details the DTCs seen on this battery. The following list details each main DTC. Table 2: Situations where the Flux Power lithium battery will cut power and display a DTC. Fault... -
Page 8: Safety And Reliability
4 Safety and Reliability Flux Power LiFT Packs are completely sealed and require no watering. No electrolyte must be added and there is no danger of acid spills or explosive vapors during normal use. In addition, the Flux Power LiFT Pack X-Series-G1 is... -
Page 9: Hazardous Material Information
(lead) and inherent dangers present: acid spills, explosive gases, and lead poisoning. For more information on local regulations, contact your local EPA and fire department or contact FLUX Power and we will do our best to assist you. -
Page 10: Recycling/Disposal
Contact Flux Power if you need assistance. If you are unable to locate a lithium-ion recycler in your area, Flux Power agrees to take back any battery that is at its end of life. -
Page 11: Flux Power Contact Details
Flux Power, Inc. All other brands and product names are trademarks or registered trademarks of their respective owners. This information is intended for the use of Flux Power customers only. Any other use without the express written consent of Flux Power, Inc. is strictly prohibited...