Riello RG4F Installation, Use And Maintenance Instructions page 42

3. INSTALLATION
THE INSTALLATION OF THE BURNER
MUST BE CARRIED OUT BY QUALI-
FIED PERSONNEL, AS INDICATED IN
ATTENTION
THIS MANUAL AND IN COMPLIANCE
WITH THE STANDARDS AND REGULA-
TIONS OF THE LAWS IN FORCE.
3.1 HEAT GENERATOR FIXING
Put on the flange (1) the screw and two nuts, (see Fig. 4).

Widen, if necessary, the insulating gasket holes (4).

Fix the flange (1) to the heat generator door (3) using screws (5) and (if necessary) the nuts (2) interposing the

insulating gasket (4), (see Fig. 4).
After installation ensure that burner is lightly inclined as in Fig. 5.

S7071
3.2 OPERATION POSITION
The burner is designed to work only in
the positions
Any other position could compromise the
ATTENTION
correct working
Installations 3 and 5 are forbidden for
safety reasons.
2903004
Fig. 4
1, 2, 4 and 6.
of the appliance.
4
1
4
GB
D5025
2 3
5 6
Fig. 6
Fig. 5
D4420