Yolink YS4908-UC Installation & User Manual page 33

Unpairing
At the YoLink Remote (controller), press and hold any ON bu on for 10-15 seconds un l
the LED quickly blinks green, then red
At the YoLink Finger (responder), press and hold the SET bu on for 10-15 seconds, un l the
LED quickly blinks green, then red
Upon un-pairing, the YoLink Remote and YoLink Finger LED will stop blinking and turn off
The YoLink Finger will no longer respond when press the associa ve ON bu on once
ON Bu on
ALL ON
Hold the first ON button on the
YoLink Remote for 10-15 seconds,
until the red light blinks quickly
1
ON OFF
1
2
3
4
5
ALL OFF
DOWN
SET Bu on
Hold the SET button on the YoLink
Finger for 10-15 seconds, until the
red light blinks quickly
2
SET
UP
31