Yolink YS4908-UC Installation & User Manual page 11

YoLink Finger
Get Ready to Install the YoLink Finger
Before installing the YoLink Finger, place it in the appropriate posi on for the finger to actuate
the garage door control bu on. Ensure the p of the finger touches the control bu on (closer to
the middle than the edge). Use the UP and DOWN bu ons on the Finger to adjust the "res ng
posi on" (posi on it will in while not actua ng the door control bu on). The use of both hands
and/or something to temporarily hold the Finger in place may be needed, such as painter's tape.
When the best posi on for the Finger is determined, it is recommend to mark the posi on by
outlining part of the Finger on the wall with a pencil or painter's tape
SET
DOWN UP
1
Next to the Bu on
OR
Next to the Bu on (Inverted)
2
Determine the ideal loca on for the finger
1
OR
3
Above the Bu on
9