Canon VC-200 Instructions Manual page 33

Hide thumbs Also See for VC-200:
Table of Contents

Advertisement

CHECK POINT
Is the power source AC cord plugged into an AC outlet? (p. 10)
Is the recorder's VTR switch ON? (p. 12)
Is the battery pack charge sufficient? (pp. 13, 24)
Are all switches properly positioned? (p. 1 2)
Is the lens cap removed? (p. 13)
Are all cables properly connected? (p. 9)
Is the standby/operate switch set to NORM or UP? (pp. 13,15, 21)
Is the white filter switch set to OUT? (p. 14)
Is there enough light for proper exposure? (p. 15)
Is the filter selector properly set? (pp. 13, 25)
Is white balance properly adjusted? (pp. 14, 24)
Is the TV set you are using properly adjusted? (See TV set operating
instructions.)
If autofocusing: Is the autofocus window blocked? (p. 15)
Is the subject suitable for the autofocus system? (p. 16)
If manually focusing: Has the lens been focused correctly? (p. 15)
Is the lens dirty?
Is the zooming lever set to macro? (p. 20)
Has the recorder been placed in the record pause mode by pressing the
recorder's play and record buttons at the same time? (p. 18)

Advertisement

Table of Contents
loading

Table of Contents