Installing The Software - Yamaha M7CL Installation Manual

The M7CL V3 Editor (subsequently called M7CL Editor) enables you to prepare the M7CL version 3 mixing console
(M7CL-48ES, M7CL-48, and M7CL-32: subsequently called M7CL) settings beforehand by editing the parameters
offline, and also remotely monitor/control the M7CL online.
1
Verify that your system meets the operating requirements of each software program.
2
Install the Studio Manager and each Editor.
3
Install the appropriate driver to your computer.
4
Configure the network settings.
5
Start up the Studio Manager, then start up the Editor.
For subsequent operations, refer to the PDF manual from the [HELP] menu in each software program.
M7CL V3 Editor Installation Guide
M7CL V3 Editor

Installing the Software

Procedures
page 4
page 4
page 5
page 6
page 8
3