Table of Contents
Advertisement
PRISM
CENTRAL SYSTEM 2
®
TROUBLESHOOTING GUIDE
Service and Repair should only be performed by Lincoln Electric Factory Trained Personnel. Unauthorized repairs
performed on this equipment may result in danger to the technician and machine operator and will invalidate your factory
warranty. For your safety and to avoid ELECTRICAL SHOCK, please observe all safety notes and precautions detailed
throughout this manual.
This Troubleshooting Guide is provided to help you locate and repair possible
machine malfunctions. Simply follow the three-step procedure listed below.
Step 1. LOCATE PROBLEM (SYMPTOM).
Look under the column labeled "PROBLEM (SYMPTOMS)". This column describes
possible symptoms that the machine may exhibit. Find the listing that best
describes the symptom that the machine is exhibiting.
Step 2. POSSIBLE CAUSE(S).
The second column labeled "POSSIBLE AREA(S) OF MISADJUSTMENTS" lists the
obvious external possibilities that may contribute to the machine symptom.
Step 3. RECOMMENDED COURSE OF ACTION
This column provides a course of action for the Possible Areas of Misadjustment(s).
Service and Technical Support
not dealt with in this manual, please contact Lincoln Electric Automation Department
888-935-3878.
Make sure you have the following data on hand:
- product name
- serial number
WWW.LINCOLNELECTRIC.COM/LOCATOR
TROUBLESHOOTING
Advertisement
Table of Contents
