Power; Connecting To A Power Source; Power-On Sequence - Yamaha DTXTREME IIs Owner's Manual

Power

Connecting to a Power Source

Make sure that the STANDBY/ON switch is in the STANDBY position. Plug the supplied AC power adapter to
the DC IN jack on the DTXTREME IIs rear panel. Fix the power cord to the cable hook, ensuring that the
adapter plug does not come loose. Connect the adapter to an AC outlet.
Always use the supplied AC power adapter (PA-5C or PA-5D). Use of a power adapter other than the type specified may cause a
malfunction or result in damage to the DTXTREME IIs. Also, unplug the power adapter from the AC outlet if the DTXTREME IIs
is not used for an extended period of time.

Power-On Sequence

After you've made all necessary connections (trigger, audio, MIDI), turn down all volume controls of the
DTXTREME IIs and other audio equipment. Turn on your system in the order of the audio signal flow (first the
mixer, then the amplifier or powered speakers).
MIDI master devices
The DTXTREME IIs displays a splash screen, and then shows PLAY mode screen. Now you can start playing.
If you are ready, see the next page for detailed explanations on how to use the DTXTREME IIs system.
n When turning off your system, first turn down all volume controls for the audio equipment, then turn off devices in the reverse order
of the audio signal flow.
Cable fook
R L MONO
OUTPUT
STANDBY
DC IN 12V
+
ON
3 TOM2 2 TOM1 1 SNARE
DTXTREME IIs
KIT=P1 SONG=P1
Kit name Songname
To AC outlet
AC power adapter
DRUM TRIGGER MODULE
Audio equipment (first mixer, then amplifier)
TEMPO BEAT CLICK
=107 4/4
19