Sampling Feature - Yamaha DTXTREME IIs Owner's Manual

[UT 17] & [UT 18] Sequencer
The SEQ pages let you specify how to operate the built-in
sequencer.
[UT 17] MIDICtl SyncMode
SEQ off internal
1 2
[UT 18] UseTempo PlayCount RecCount
SEQ song off
3 4
1 MIDICtl
Enable (on) or disable (off ) sending and receiving MIDI
System Real-time messages (Start, Stop, and Continue).
❏ Settings: off, on
2 SyncMode
Enable or disable synchronization of the built-in sequencer.
❏ Settings:
• internal: The built-in sequencer runs in sync to the
DTXTREME IIs internal clock.
• external: The built-in sequencer runs in sync to MIDI timing
clock (F8) received via MIDI IN or USB.
n If you want DTXTREME IIs to completely sync to an external
device, set MIDICtl 1 to on and SyncMode 2 to external. The
built-in sequencer will start or stop in sync to an external rhythm
machine or sequencer, while running at that device's tempo.
3 UseTempo
Enable or disable using the tempo information assigned to a
song or drum kit.
❏ Settings:
• song: Enables the tempo information set in the song or a drum
kit.
• global: Disables the tempo information set in the song or a
drum kit and enables the tempo that is manually adjusted.
n You'll need to specify the tempo on the connected external device if
you set SyncMode 2 to external.
4 PlayCount
Enable or disable a two-measure click count before actual
song playback after you press the Start/Stop button.
❏ Settings: off, on
5 RecCount
Enable or disable a two-measure click count before actual
song recording after you press the Start/Stop button.
❏ Settings: off, on

Sampling Feature

You can use the front panel AUX IN jack to input line level
audio signals from a CD player or other devices, and you can
record these signals digitally as waveform samples. Once a
sample is captured, you can edit it simply to use as original
drum voice. This sampling function is available from the
WAVE pages in the utility features.
on
5
n If you want to use a captured sample as drum voice, first save it to
82
[UT 19] Start
WAVE x100k 0000256 0000512 0001024
[UT 20] TrigLevel Source
WAVE manual left 4193792(95.0s)
[UT 21] Delete All Waves
WAVE
the memory card after editing. Since the captured sample will be
lost when you turn DTXTREME IIs off, make sure prepare a
memory card before you start sampling.
LpStart End
FreeMemory