Power Supply
Charging
This product can be used after the battery is charged by connecting it to an AC outlet or a
USB mobile battery as described below. In particular, before using this product for the first
time after it is unpacked, make sure to fully charge the battery until the Standby/On lamp
(red) turns off.
Charging with a USB power adaptor (commercially available)
Connect the USB power adaptor in the order of the numbers shown in the figure below.
@
Charging with a USB mobile battery (commercially available)
Connect the USB mobile battery in the order of the numbers shown in the figure below.
A. USB cable (included in the package)
B. USB power adaptor (commercially available)
A. USB cable (included in the package)
FGDP-30 User Guide
7