Flex CS 62 18.0-EC Manual
  1. Manuals
  2. Brands
  3. Flex Manuals
  4. Saw
  5. CS 62 18.0-EC
  6. Manual

Flex CS 62 18.0-EC Manual

Hide thumbs Also See for CS 62 18.0-EC:
Table of Contents

Advertisement

Quick Links

Download this manual
Contents
Symbols used in this manual . . . . . . . . . 16
Symbols on the power tool . . . . . . . . . . . 16
For your safety . . . . . . . . . . . . . . . . . . . . 16
Noise and vibration. . . . . . . . . . . . . . . . . 19
Technical specifications . . . . . . . . . . . . . 19
Overview . . . . . . . . . . . . . . . . . . . . . . . . 20
Instructions for use . . . . . . . . . . . . . . . . . 21
Maintenance and care . . . . . . . . . . . . . . 26
Disposal information. . . . . . . . . . . . . . . . 26
-Declaration of Conformity . . . . . . . . . 27
Exemption from liability . . . . . . . . . . . . . 27

Symbols used in this manual

WARNING!
Denotes impending danger.
Non-observance of this warning may result
in death or extremely severe injuries.
CAUTION!
Denotes a possibly dangerous situation.
Non-observance of this warning may result
in slight injury or damage to property.
NOTE
Denotes application tips and important
information.

Symbols on the power tool

Before switching on the power
tool, read the operating manual!
Wear goggles!
Wear ear protection!
Disposal information for the old
machine (see page 26)!
16

For your safety

WARNING!
Before using the power tool, please read
and follow:
- these operating instructions,
- the "General safety instructions" on the
handling of power tools in the enclosed
booklet (leaflet
no.: 315.915),
-
- the currently valid site rules and the
regulations for the prevention of
accidents.
This power tool is state of the art and has
been constructed in accordance with
the acknowledged safety regulations.
Nevertheless, when in use, the power tool
may be a danger to life and limb of the user
or a third party, or the power tool or other
property may be damaged.
- The power tool may be operated only if it
is as intended,
- in perfect working order.
Faults which impair safety must be repaired
immediately.
Intended use
The plunge saw CS 62 18.0-EC is designed
Ó for commercial use in industry and trade,
Ó for lengthwise and cross cuts with
a straight cutting path,
Ó for cutting solid wood and board
materials such as chipboard and wood-
core plywood and MDF boards up to
a maximum thickness of 62 mm,
Ó for use with circular saw blades which
FLEX offers for this machine.
Not permitted are
Ó the use of HSS saw blades and cutting-
off wheels,
Ó stationary use as a circular bench saw,
Ó use outdoors in the rain,
Ó use in potentially explosive areas.
CS 62 18.0-EC

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CS 62 18.0-EC and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Flex CS 62 18.0-EC

Summary of Contents for Flex CS 62 18.0-EC

  • Page 1: Table Of Contents

    NOTE Intended use Denotes application tips and important The plunge saw CS 62 18.0-EC is designed information. Ó for commercial use in industry and trade, Ó for lengthwise and cross cuts with Symbols on the power tool a straight cutting path, Ó...
  • Page 2 CS 62 18.0-EC Safety instructions for circular saws Kickback causes and related warnings Kickback is a sudden reaction to a pinched, WARNING! bound or misaligned saw blade, causing an Read and follow all safety instructions and uncontrolled saw to lift up and out of the other instructions in this manual.
  • Page 3 CS 62 18.0-EC Lower guard function  Do not use dull or damaged blades. Unsharpened or improperly set blades  Check lower guard for proper closing produce narrow kerf causing excessive before each use. Do not operate the saw if friction, blade binding and kickback.

  • Page 4: Noise And Vibration

    CS 62 18.0-EC Noise and vibration used for a preliminary assessment of exposure. The declared vibration emission The noise and vibration values have been level represents the main applications of the determined in accordance with EN 62841. tool. However if the tool is used for different...

  • Page 5: Overview

    CS 62 18.0-EC Overview Filter Hexagon-socket key Battery Spindle locking button Rechargeable battery release Mitre angle scale Guard hood Base plate Handle Clamping lever for mitre angle Auxiliary handle Angle preselection Cutting depth scale Circular saw blade Activation lock for ON/OFF switch...

  • Page 6: Instructions For Use

    Attaching or changing the saw blade NOTE It is recommended to use only circular saw blades which FLEX offers for use with this machine. - Only use saw blades with a diameter corresponding with the inscriptions on the saw.
  • Page 7 CS 62 18.0-EC Setting the mitre angle NOTE In the case of mitre cuts, the cutting depth is less than the value displayed on the scale for the cutting depth.  Insert connection (1.).  Secure suction hose with adapter on connection (2.).
  • Page 8 CS 62 18.0-EC Switching on and off  To remove, press the release button (1.) and pull out the battery (2.). CAUTION! For reasons of safety the switch is not locked and must be held down during sawing. The switch interlock prevents the power tool from being switched on unintentionally.
  • Page 9 CS 62 18.0-EC  Switch on dust extraction system.  Hold the handle with your right hand.  Place saw bench on the workpiece.  Switch on saw and wait until the saw blade has reached the maximum speed.  Slowly feed the saw along the material.
  • Page 10 Operating state display Power cord with mains plug The CA 10.8/18.0 charger is designed to charge FLEX batteries of the following types – AP 10.8 (2.5 Ah),  Insert the battery fully into the charger – AP 18.0 (2.5 Ah), until it clicks into place.

  • Page 11: Maintenance And Care

    CS 62 18.0-EC Charger WARNING! Before performing any work, pull out the mains plug. Do not use water or liquid detergents.  Remove dirt and dust from the housing with a brush or a dry cloth.  Pull out the mains plug.

  • Page 12: Declaration Of Conformity

    EN 62841 in accordance with the regu- lations of the directives 2014/30/EU, 2006/42/EG, 2011/65/EU. Responsible for technical documents: FLEX-Elektrowerkzeuge GmbH, R & D Bahnhofstrasse 15, D-71711 Steinheim/Murr 19.06.2018 FLEX-Elektrowerkzeuge GmbH Bahnhofstrasse 15, D-71711 Steinheim/Murr Exemption from liability...

Table of Contents