Advertisement
UT377C User Manual
4.3.
Buttons
Buttons
POWER
5. Operations
5.1.
Power On/Off
1) Power On: Long press POWER button until the screen on.
2) Power Off: Long press POWER button until the "OFF" showed on the screen.
5.2.
Measurement
1. Check the type of measured target, Softwood, Hardwood, Drywall or Masonry,
then short press MODE button to select.
2. Place the sensor (back side of the device) on the measured target, measuring
the moisture content.
：
Notes
Place the sensor (back side of the device) on the measured target to keep good
touch with each other for high accuracy. Meanwhile, measure the target as per
the following handhold way, only using fingers to hold the device, with palm
away from the device to avoid the reading error.
Short Press
Mode Switch
MODE
Flashlight ON/OFF
Data Hold
HOLD
Long Press
Zero Reset
Power On/Off
Temperature Unit Switch
7 / 11
Advertisement
