Operation; General - Hatco Glo-Ray GRAIH Series Installation And Operating Manual

English English

General

Glo-Ray Infra-Black Strip Heaters are designed for ease of
® ®
operation. Use the following information and procedures to
operate the unit.
WARNING
Read all safety messages in the IMPORTANT SAFETY IN-
FORMATION section before operating this equipment.
Controls
Infra-Black Strip Heaters are available with either a Thermostatic
Control Box with Indicator Lights (TCBI) mounted on the unit or
an optional remote control enclosure (RMB) mounted remotely.
The following is a list of the available controls for either control
configuration.
I/O (ON/OFF) Toggle Switch—Turns power on and off to the
heating elements and/or the lights.
Thermostatic Control—Controls the temperature of the
heating element(s). The thermostatic control is available only
on a TCBI-equipped unit.
Infinite Control—Turns on the power and controls the output
of the heating elements. The infinite control is available only on
a remote control enclosure.
Indicator Light—Illuminates when power is on, shuts off when
power is off.
Startup
1. Move the I/O (ON/OFF) toggle switch to the I (ON) position
and/or turn the infinite control(s) to the desired setting.
• The indicator light (if equipped) will illuminate and the
heating elements will energize.
2. For units with a thermostatic control, turn the control to the
desired setting.
NOTE: Allow 15–20 minutes to reach operating temperature.
3. For units with display lights, move the lights I/O (ON/OFF)
toggle switch to the I (ON) position to turn on the lights.
Thermostatic Control
Indicator Light
Thermostatic Control Box with Indicator Lights (TCBI)
Form No. GRAIH_AAM-0117
NOTE: Refer to the OPTIONS AND ACCESSORIES section
Shutdown
1. Move the I/O (ON/OFF) toggle switch to the O (OFF)
position and/or turn the infinite control(s) to the O (OFF)
position.
2. For units with display lights, move the lights I/O (ON/OFF)
toggle switch to the O (OFF) position.
I/O (ON/OFF)
Toggle Switch
13
RMB Series
Lights
Infinite
Control
I/O (ON/OFF)
Toggle Switch
RMB2 Series
I/O (ON/OFF)
Indicator Light
Toggle Switch
Remote Control Enclosures
for remote control enclosure information.
• The indicator light (if equipped) will shut off and the
heating elements will shut down.

OPERATION

Indicator Light
Infinite Control