Honeywell TR50 User Manual page 2

Disclaimer
This document contains Honeywell proprietary information. Information contained herein is to be used solely for the purpose
submitted, and no part of this document or its contents shall be reproduced, published, or disclosed to a third party without
the express permission of Honeywell International Inc.
While this information is presented in good faith and believed to be accurate, Honeywell disclaims the implied warranties of
merchantability and fitness for a purpose and makes no express warranties except as may be stated in its written agreement
with and for its customer.
In no event is Honeywell liable to anyone for any direct, special, or consequential damages. The information and
specifications in this document are subject to change without notice.
© 2023 – Honeywell International Inc.
Other Trademarks
Third-party brands and names are the property of their respective owners.
Microsoft®, Win32, Windows®, Windows XP, Windows Vista, Windows 7, Windows 8, and Visual Studio are registered
trademarks of Microsoft Corporation in the United States and other countries. Other products and company names
mentioned herein may be the trademarks of their respective owners.
Examples of companies, organizations, products, domain names, e-mail addresses, logos, people, places, and events are
fictitious. No association with any real company, organization, product, domain name, e-mail address, logo, person, place, or
event is intended or should be inferred.
Support and Other Contacts
For technical assistance or further information, call your nearest Honeywell office.
Revisions
Document Version
09
Reference documents
TR50 IAQ Sensor Datasheet
TR50 IAQ Sensor Mounting Instructions
Quick Start
• Before installing the TR50 Sensor device, make sure the wiring is done correctly. (Refer Installation Chapter for detailed
information).
• Check Thresholding default settings and how to change it as per site requirements (Refer Getting started chapter for
detailed information).
• Address setting should be done on the device (as per required protocols) before connecting it to any controller. (Refer
Configuration chapter for detailed information).
• The TVOC parameter take at least 48 hours to stablize once the TR50 device is power up. (Refer operations chapter for
detailed information).
TR50 - User Guide
Published
10-11-2023
31-00565M
31-00566M
I