Cleaning, Maintenance And Ordering Spare Parts - EINHELL FREELEXO Basic Operating Instructions Manual

the USB stick to a computer. A text fi le (*.txt)
will have been created by the robot lawn
mower. This fi le contains a PUK, a personal
code. Please contact the customer services
team to obtain your PIN.
6.5 Robot lawn mower settings
Setting the mowing time
1. Unlock the control panel (2).
2. Select the desired mowing time by pressing
the corresponding button:
2.1 If you press the corresponding button briefl y,
the robot lawn mower will mow daily. The
corresponding display will appear through
constant lighting of the time LEDs.
2.2 If you press the corresponding button longer,
the robot lawn mower will mow every second
day. The corresponding display will appear
through fl ashing of the time LEDs.
3. The time is shown by the time LEDs (50).
4. To confi rm the setting, press the "OK" button
(63).
The time at which the changes were made is
now the daily starting time. The number of hours
shown is the daily work time.
It is recommended to base the mowing time
setting on 8 hours per day for 500 m² as a guide-
line. The selected working time may need to be
adapted to take account of the garden's size and
complexity.
Resetting the daily start time
To reset the daily start time, press the "OK" button
(63) and the "6H" button (60) simultaneously and
hold for 3 seconds. The time at which the chan-
ges were made is now the daily starting time. The
number of hours shown is the daily work time.
Starting procedure
1. Unlock the control panel (2).
2. Via the "START" button (64) you can select
the area where you want the mower to work.
More detailed information about the two are-
as can be found in the section "Before using
for the fi rst time" under "Perimeter wire".
2.1 Press briefl y on the "START" button (64) for
your robot lawn mower to work in the main
area. The status LED (52) will light up green
and stay on permanently.
2.2 Press longer on the "START" button (64) for
your robot lawn mower to work in the secon-
dary area. The status LED (52) will light up
green and fl ash.
3. Close the display cover (23).
Anl_FREELEXO_Basic_SPK13.indb 41 Anl_FREELEXO_Basic_SPK13.indb 41
GB
The robot lawn mower will now operate in ac-
cordance with the mowing time setting. The batte-
ry charge level is monitored during the work time
and displayed via the battery LED (54). As soon
as the battery charge level drops to 30%, the
robot lawn mower will return automatically to the
charging station.
Stopping the mowing
1. To bring the robot lawn mower to an immedia-
te stop, press the STOP button (3).
2. Fully open the display cover (23).
3. Unlock the control panel (2).
4. Press the "HOME" button (61) to send the ro-
bot lawn mower along the perimeter wire (18)
and back to the charging station (19).
5. Close the display cover (23).
STOP status:
When you press the STOP button (3), the robot
lawn mower will adopt a STOP status. This will be
indicated by the time LEDs (50) fl ashing one after
the other. The robot lawn mower will interrupt its
mowing until this STOP status is canceled.
The STOP status can be canceled as follows:
•
By unlocking the robot lawn mower and pres-
sing the button „START" (64) in order to send
off the robot lawn mower to mow. Close the
display cover (23).
•
By unlocking the robot lawn mower and pres-
sing the button „HOME" (61) in order to send
the robot lawn mower back into the station.
Close the display cover (23).
•
By unlocking the robot lawn mower and clo-
sing the display cover (23).
•
By unlocking the robot lawn mower and pres-
sing the lock button (62).
7. Cleaning, maintenance and
ordering spare parts
Hazard!
The equipment must be disconnected from the
power supply (pull out the power plug and switch
off the equipment by the main switch (7) (OFF)
(Fig. 8) prior to performing any cleaning and
maintenance work. Also take the battery out of
the robot lawn mower.
Caution! Wear work gloves!
- 41 -
02.10.2023 10:04:58 02.10.2023 10:04:58