Mitsubishi Electric e Series Service Handbook page 78

[ IV Remote Controller ]
<5> Using power save
Function description
Power Save is a function that regulates the compressor rotation count either daily or according to a specified period and
according to a preset time interval or regulated capacity. Use this function when you want to inhibit electric power use.
A typical scenario where Power Save can be used to inhibit the power consumption for water heating would be periods of
particularly heavy operating loads for air conditioning and other equipment, such as periods when large numbers of people
check in at a hotel or similar accommodation facility.
Button operation
1
Unit1
Weekly timer
Period timer
Power Save
F1 F2
2
Unit1
Period
F1 F2
Unit1
Set period
F1 F2
3
Unit1
Period
F1 F2
HWE20010
From the Main menu, select "Schedule" >
FRI
"Power Save" and press the [Select] button.
F3 F4
Press the [F3] button to proceed to the settings screen.
FRI
You can set 2 types of pattern, as necessary.
* If the periods specified in 1 and 2 overlap, only
period specified in 1 will be implemented.
Edit Action
F3 F4
Press the [F1] to [F4] buttons to set the period and then press the [Select] button.
FRI
F3 F4
The Power Save screen will be displayed.
FRI
Press the [F4] button.
Edit Action
F3 F4
- 69 -
GB