TP-Link Festa FS318GP Installation Manual page 5

Table of Contents

Advertisement

The front panel of Festa FS352GP is shown as the following figure.
Figure 1-3
Front Panel of Festa FS352GP
Reset
LEDs
For Festa FS318GP/FS328GP/FS352GP
LED
Indication
On: The switch is powered on.
PWR
Off: The switch is powered off or power supply is abnormal.
Flashing: Power supply is abnormal.
Flashing: The switch works properly.
SYS
On or Off: The switch works improperly.
Green: All the fans work properly.
FAN
Yellow: Not all the fans work properly.
Note: Not for Festa FS318GP.
On: The remaining PoE power is ≤ 7 W.
PoE Max
Flashing: The remaining PoE power keeps ≤ 7 W after this LED is on for 2 minutes.
Off: The remaining PoE power is > 7 W.
Green On: Running at 1000 Mbps, but no activity.
Green Flashing: Running at 1000 Mbps and is transmitting or receiving data.
Yellow On: Running at 10/100 Mbps, but no activity.
Speed or PoE
Yellow Flashing: Running at 10/100 Mbps and is transmitting or receiving data.
(When the Speed
Off: No device is linked to the corresponding port.
LED is on)
Note: Speed or PoE for port 1–16 of Festa FS318GP, port 1–24 of Festa FS328GP, and
port 1-48 of Festa FS352GP.
Green On: The port is supplying power normally.
Green Flashing: The supply power exceeds the correponding port's maximum power.
Yellow On: Overload or short circuit is detected.
Speed or PoE
Yellow Flashing: Power-on self-test failed.
(When the PoE LED
Off: Not providing PoE power on the port.
is on)
Note: Speed or PoE for port 1–16 of Festa FS318GP, port 1–24 of Festa FS328GP, and
port 1-48 of Festa FS352GP.
Green On: A 1000 Mbps device is linked to the corresponding port, but no activity.
Green Flashing: A 1000 Mbps device is linked to the corresponding port and data is
being transmitted or received.
Speed
Yellow On: A 100 Mbps device is linked to the corresponding port, but no activity.
1000Base-X
Yellow Flashing: A 100 Mbps device is linked to the corresponding port and is
1000Base-X/
transmitting or receiving data.
100Base-FX
Off: No device is linked to the corresponding port.
Note: Speed for port 17-18 of Festa FS318GP. 1000Base-X for port 25–28 of Festa
FS328GP. 1000Base-X/100Base-FX for port 49-52 of Festa FS352GP.
LED Mode
LEDs
Switch Button
10/100/1000 Mbps
RJ45 Port
Festa Smart Switch
SFP Slot
Introduction
02

Advertisement

Table of Contents
loading

This manual is also suitable for:

Festa fs328gpFesta fs352gp

Table of Contents