TP-Link Festa FS318GP Installation Manual page 14

Festa Smart Switch
5. On the controller's management page, go to Devices, and click + Add Devices and follow the step-
by-step instructions to adopt your devices.
Now you can configure and manage your devices on the controller.
Note:
1. Before you start, be sure to power up and connect your devices according to the topology figure.
2. A DHCP server (typically a router with DHCP function enabled) is required to assign IP addresses
to the EAPs and clients in your local network.
Via Festa App
■
1. Download and install the TP-Link Festa App from App Store or Google Play.
or
Scan for Festa App
2. Launch the Festa App and log in with your TP-Link ID.
3. Tap + on the upper right corner, then you will see you have successfully registered for a Cloud-
Based Controller and the controller has been added to the controller list.
4. Tap Confirm, tap Let's Get Started and follow the step-by-step instructions to complete the
configuration wizard of the controller.
5. On the controller's management page, go to Devices, and click + on the upper right corner, and
follow the step-by-step instructions to adopt your devices.
Now you can configure and manage your devices via the Festa App.
For detailed configurations, refer to the User Guide of the controller. The guide can be found on the
download center of our official website: https://www.tp-link.com/support/download/?type=smb.
11 Configuration
Festa App