Lubrication - JUKI DLN-5410NDD-7 Instruction Manual

10. Lubrication

WARNING :
1. Do not connect the power plug until the lubrication has been completed so as to prevent acci-
dents due to abrupt start of the sewing machine,
2. To prevent the occurrence of an inflammation or rash, immediately wash the related portions if oil
adheres to your eyes or other parts of your body.
3. If oil is mistakenly swallowed, diarrhea or vomitting may occur. Put oil in a place where children
cannot reach.
A
❶
1. When you use a new sewing machine or a sewing machine after an extended period of dis-
use, use the sewing machine after performing break-in at 2,000 sti/min or less.
2. For the oil lubrication, purchase JUKI CORPORATION GENUINE OIL 7 (Part No. :
MML007600CA).
3. Be sure to lubricate clean oil.
4. Be aware that, if the oil is poured in the oil pan exceeding the marker "HIGH" A, oil leakage
can be caused.
5. Transporting the sewing machine with the sewing machine filled with oil can give rise to the
risk of oil leakage. Be sure to discharge oil from the sewing machine through drain cock.
B
❷
– 10 –
1) Before starting the sewing machine, fill oil pan ❶
with NEW DEFRIX OIL No.1 or JUKI CORPORA-
TION GENUINE OIL7 up to "HIGH" mark A.
2) Add oil before the oil surface comes down to
reach the "LOW" mark B.
3) When you operate the machine after lubrication,
you will see splashing oil through oil sight window
❷ if the lubrication is adequate.
4) Note that the amount of the splashing oil is unre-
lated to the amount of the lubricating oil.