Starting The Cooking Process; End Of Cooking By Touching - Hisense BO4CM4U Instructions For Use Manual

Combined microwave ovens
Table of Contents

Advertisement

Starting the cooking process

INFORMATION!
If no timer function is selected, cooking time will appear on the display unit. A short acoustic
signal is emitted when the oven reaches the selected temperature.

End of cooking by touching

Stop the cooking process by touching the
signal is emitted.
INFORMATION!
After the operation is completed, all timer settings are also stopped and deleted, except for the
minute minder. Time of day (clock) will be displayed. The cooling fan will continue to operate for
a while.
After the use of the oven, some water may be left in the condensate channel (underneath the
door). Wipe the channel with a sponge or a cloth.
Start the cooking process by pressing the
Until the set temperature is reached for the first time, the current and the
set temperature will alternate on the display unit. The temperature symbol
flashes at first. When the desired temperature is reached, it goes off.
Extra gratin
You may only activate this function 10 minutes after the start of the
cooking process (the symbol
unit).
Press the KNOB to open settings. Rotate the KNOB to the sign
and confirm your selection. Rotate the KNOB again and
select the fully lit sign. Confirm your selection. The function is now
activated. Cooking time of 10 minutes (10:00) will appear on the display
unit.
To change the duration, press on the KNOB twice and rotate it to adjust
the time (max. 30 min). Confirm your selection.
The function is used in the last stage of the cooking process when you
add sauce/wet rub or dry rub onto the food, or when you wish to
additionally brown the crust. A golden-brown crust will form on the dish
during the gratin process, which protects the food from drying out, while
also imparting a more pleasant appearance and better flavour.
INFORMATION!
The function can also be switched off while it is in progress. Rotate
the KNOB to the setting
confirm. Choose the dimmed sign and confirm it by pressing on
the KNOB.
key. End appears on display unit and an acoustic
key.
will appear on the display
and press on the KNOB to
27

Advertisement

Table of Contents
loading

Table of Contents