Gree GWH07AFAXA-K3NNA1A Service Manual page 50

Service Manual
displaying. Cancel T-OFF. Under the condition that T-OFF is
started up, press "T-OFF" button to cancel it.
Note:
● U n d e r o n a n d o ff s t a t u s , y o u c a n s e t T- O F F o r T- O N
simultaneously.
● Before setting T-ON or T-OFF, please adjust the clock time.
● After starting up T-ON or T-OFF,set the constant circulating
valid.
● After that, air conditioner will be turned on or turned off
according to setting time.ON/OFF button has no effect on setting.
If you don't need this function, please use remote controller to
cancel it.
I FEEL button
Press this button to start I FEEL function and "
displayed on the remote controller. After this function is set, the
remote controller will send the detected ambient temperature
to the controller and the unit will automatically adjust the indoor
temperature according to the detected temperature. Press this
button again to cancel I FEEL function and "
● Please put the remote controller near user when this function
is set. Do not put the remote contro ller near the object of high
temperature or low temperature in order to avoid detecting
inaccurate amb ient temperature. When I FEEL function is turned
on, the remote controller should be put within the area where
indoor unit can receive the signal sent by the remote controller.
CLOCK button
Press this button to set clock time. "
will blink. Press " " or "
Each pressing of " " or "
decrease 1 minute.If hold "
change quickly. Release this button when reaching your required
time. Press "CLOCK" button to confirm the time. "
blinking.
Note:
● Clock time adopts 24-hour mode.
● The interval between two operations can't exceed 5s. Otherwise,
remote controller will quit setting status. Operation for TIMER ON/
TIMER OFF is the same.
SLEEP button
Under COOL or HEAT mode, press this button to start up sleep
function.
" " icon is displayed on remote controller. Press this button
again to cancel sleep function and "
powered on, Sleep Off is defaulted. After the unit is turned off, the
Sleep function is canceled.
In this mode, set temperature will be adjusted with the change
of time. Under Fan, DRY and Auto modes, this function is not
available.
Technical Information
" will be
" will disappear.
" icon on remote controller
" button within 5s to set clock time.
" button, clock time will increas e or
" or " " button, 2s later, time will
" icon stops
" icon will disappear.After
button
Pressing this button in COOL or DRY mode, the icon "
displayed and the indoor fan will continue operation for a while in
order to dry the indoor unit even though you have turned off the
unit. After energization, X-FAN OFF is Having set X-FAN function
on: After turning off the unit by pressing ON/OFF defaulted. X-FAN
is not available in AUTO, FAN or HEAT mode.
This function indicates that moisture on evapora-tor of indoor unit
will be blowed after the unit is stopped to avoid mould.
● Having set X-FAN function on: After turning off the unit by
pressing ON/OFF button indoor fan will continue running for a
while. at low speed. In this period, press X-FAN button to stop
indoor fan directly.
● Having set X-FAN function off: After turning off the unit by
pressing ON/OFF button, the complete unit will be off directly.
button
Press this button to achieve the on and off of health and
scavenging functions in operation station. Press this button
for the first time to start scavenging function; LCD displays
" ". Press the button for the second time to start health and
scavenging functions simultaneously; LCD displays "
". Press this button for the third time to quit health and scavenging
functions simultaneously. Press the button for the fourth time to
start health function; LCD display "
repeat the operation above.
● This function is applicable to partial of models .
button
LIGHT
Press this button to turn off display light on indoor unit. "
on remote controller disappears. Press this button again to turn on
display light. " " icon is displayed.
TEMP button
Press this button, you can see indoor set temperature, indoor
ambient temperature on indoor unit' s display. The setting on
remote controller is selected circularly as below:
When selecting " " or no display with remote controller,
temperature indicator on indoor unit displays set temperature.
When selecting " " with remote controller, temperature
indicator on indoor unit displays indoor ambient temperature.
When selecting " " with remote controller, temperature indicator
on indoor unit displays outdoor ambient temperature.
NOTE:
● Outdoor temperature display is not available for some models.
At that time, indoor unit receives "
" is
" and "
". Press this button again to
" icon
" signal, while it displays
47