Mixer Control Panel - Montarbo NETTUNO 10 User Manual

7

MIXER CONTROL PANEL

1
2
3
4
1 FX
This knob balances the amount of effect applied to channels 1, 2, 3 and 4 independently.
The effect to be loaded can be selected from the display or via the app.
2 LEVEL
This knob adjusts the channel level.
3 MIC/HI-Z/LINE SELECTOR
This selector sets the input sensitivity for microphone, line or high-impedance signals
(the latter allows an electric guitar or bass to be connected directly).
4 SIGNAL/PEAK LED
When lit green, this LED indicates that there is an input signal; when lit red, it indicates
that the amplifier protection circuit has triggered. Adjust the input level so that this
circuit triggers as little as possible. When a channel is muted, the corresponding LED
flashes; if the Master channel is muted, all LEDs flash.
5 AUX IN/BLUETOOTH
Use this selector to assign either the signal from the Stereo Aux Input or audio streaming
from an external device connected via Bluetooth
10
SELECTOR
®
user manual
5
11 14
12 13
to channels 7-8.
®
6
7
8
9
21