Advertisement
Control Element
REAR PANEL
1- Input Connection
Use push-button for fixed installation.
The Positive connection is usually marked with ( + ), or Red push-button. Use it to connect the amplifier output ( + ).
The Negative connection is usually marked with ( - ), or Black push-button. Use it to connect the amplifier output ( - ).
2- Power Selections
With this rotary switch, it is possible to select the power level of MWS40T from 5W minimum to 40W maximum for two
different constant voltages 70V or 100V. In Off position the speaker system is disconnected from the Line. For
MWS40T, the bypass is activated in 6 Ohms position.
3- Balanced Input
4- ON/OFF switch
Use this switch to switch on/off power supply.
5- Stereo Input
It is used to input stereo signal.
6- LINK
It is used for outer signal output and be connected with other active speaker cabinets.
7- Volume Control
It is used to adjust the main volume.
MWS40T
MWS40A / MWS40AW
- 5 -
Advertisement
