Display Functions - Montarbo NETTUNO 10 User Manual

user manual
8

DISPLAY FUNCTIONS

Some of the system parameters shown on the display can be edited by rotating and
pressing the encoder.
SETUP
sets the configuration to Mono, Stereo, Master L or Master R.
BALANCE
balances the signal between the right and left speakers.
PRESET
this section serves to load pre-configured equalisation settings on the Master channel.
SUB LEVEL
changes the subwoofer signal level.
CONTOUR
changes the Contour parameter level on all channels independently.
FX
selects the effect type to be loaded.
APP
this section serves to enable remote system control via app.
SCREEN
locks the screen.
RESET
returns to the factory settings.
INFO
provides information about the firmware version currently installed on the system.
23