Specifications - ITW SIMCO-ION IQ EASY MODULAR SENSOR Installation And Operating Instructions Manual

3. SPECIFICATIONS

Power Supply
Input Voltage
Input Connection
Input Purge Gas
Gas Input
Operating Environment
Operating Distance
Enclosure
Dimension
Weight
Mounting
Compliance
Approval
NOTE! – The operating distance set for the Modular Sensor in the Control Station must be the same as the
mounting distance sensor to the web. This is critical for accurate calibration.
IQ EASY MODULAR SENSOR
IQ Power Control Station
24 VDC, 0.075 mA
5-pin M12 (A-coded) Connector; RJ-45 Connector
1-2.5 psi (7-17 kPa) operating pressure
5 psi (35 kPa) max operating pressure
0.14 scfm (4 NL/min) @ 1 psi (5 kPa)
0.22 scfm (6 NL/min) @ 2.5 psi (20 kPa)
Clean, dry, filtered, oil-free compressed air or nitrogen
5/32" (4 mm) OD Tubing, Quick Disconnect
122˚F (50˚C) max; 70% RH, no dewing permissible (max)
2" (50 mm), 20 kV max
3" (75 mm), 25 kV max
4" (100 mm), 30 kV max (factory default setting)
6" (150 mm), 40 kV max
8" (200 mm), 50 kV max
10" (250 mm), 60 kV max
Glass fiber reinforced polycarbonate, conductive polyamide
RJ-45: 8.02"L x 1.19"W x 2.08"H
M12: 8.09"L x 1.19"W x 2.08"H
0.36 lb (0.16 kg)
Polyamide bracket, zinc plated metal perforated strip, stainless steel hardware
RoHS
cETLus, 4000065
includes mounting bracket & connector
4
5201337 REV A