ITW SIMCO-ION IQ EASY MODULAR SENSOR Installation And Operating Instructions Manual page 13

Figure 10: IQ Easy Modular Sensor Connectors (RJ-45)
Figure 9: IQ Easy Modular Sensor Connector (M12)
The IQ Easy Modular Sensor is available in two styles: one M12 electrical connector or two RJ-45 connectors. Both
styles also have a connection at each electrical connector for purge gas. The Modular Sensor with RJ-45 connectors
may be daisy-chained with up to four (4) units.
The Modular Sensor with RJ-45 connectors is most suitable for direct connection to a BPS power supply. In this
arraignment, the Modular Sensor is automatically paired with the BPS power supply. When the IQ Easy Modula
Sensor is used with a BPS (typically in CLFB–Closed-Loop Feedback), the sensor should be plugged into connector
"PS COMM 2" of that BPS power supply. This will automatically associate (pair) the sensor with the BPS for CLFB
mode. This prepares the system for operation in the CLFB (Closed-Loop Feedback) mode.
The IQ Power Control Station has both M12 and RJ-45 connectors to support connection with either style Sensor
Module.
11
5201337 REV A
IQ EASY MODULAR SENSOR