Siemens SIMATIC ET 200SP Equipment Manual page 20

Function
Reading out service data
Reference temperature distri-
bution
Setting the time
Time distribution
Diagnostic interrupts
Hardware interrupts
Removal/insertion of multiple
I/O modules during operation
(Multi Hot Swap)
Maintenance events
User data
• MaxApplicationIn-
putLength 1440 bytes
• MaxApplicationOut-
putLength 1440 bytes
Systems of third-party manufacturers: Depending on the range of functions of the third-party system
1
Cabling with fixed connection setting
If you set a fixed connection setting of the port in STEP 7, you must also disable
"Autonegotiation/Autocrossover".
You can find more information on this topic in the STEP 7 online help and:
• As of STEP 7 V12 in the PROFINET with STEP 7 V13
(http://support.automation.siemens.com/WW/view/en/49948856) function manual
• As of STEP 7 V5.5 in the PROFINET System Description
(http://support.automation.siemens.com/WW/view/en/19292127) system manual
Replacement of an IM 155-6 PN ST
In a replacement scenario, you reset an IO device that is already in operation to the as-
delivered state using "Reset to factory settings". You can find more information in the ET
200SP distributed I/O system
(http://support.automation.siemens.com/WW/view/en/58649293) system manual.
Value status
The IM 155-6 PN ST interface module supports I/O modules with value status.
Additional information on the value status can be found in the manuals for the I/O modules.
GSD file
An additional GSD file based on the schema version V2.25 is available for the previous
PROFINET GSD files. This is only to be used when the engineering tool used does not support
GSD files of the current schema version.
IM 155-6 PN ST Interface Module (6ES7155-6AU02-0BN0)
Equipment Manual, 11/2023, A5E53132379-AA
Functional Firmware ver-
1 V6.1.0
1 V6.1.0
1 V6.1.0
1 V6.1.0
1 V6.1.0
1 V6.1.0
1 V6.1.0
1 V6.1.0
1 V6.1.0
Configuration software
- X
X X
X X
X X
X X
X X
X X
X X
X X
Product overview
3.2 Functions
X
X
X
X
X
X
X
X
X
19