Advertisement
Specification
The MR5502 Trolley is designed to be MR Conditional and is manufactured and tested to
the highest standards.
The MR5502 is constructed from 3 main materials, these being aluminium, brass and 316
stainless steel.
The Top Frame, Pivot Sections, Columns and Base Frame are all manufactured from
aluminium, which whilst being MR compatible is also lightweight, this aids the easy
movement of the trolley.
Brass and stainless steel materials are used in the manufacture of the Pivot Bolts and
parts within the Hydraulic Pump and Cylinder.
It is advisable that the product is inspected and serviced every 12 months by a Wardray
Premise trained engineer.
A service contract package is available, and details are available upon request from our
Service Department on +44 (0) 20 8398 9911.
For international customers please contact your local Wardray Premise representative for
assistance.
Table top size
Max length
Max width
Low height
Top height
Max load
mm
mm
mm
mm
mm
Kg
1930 x 592
2010
785
625
925
300
(cot-sides
(table-top)
(table-top)
down)
Maximum patient weight 47 Stone / 300 Kg
Important Information
This MR Conditional trolley has been designed for adult patients. If you use the trolley to
transport a child extra care should be taken particularly regarding the movement of the
child across the mattress and the potential for their limbs or other body parts to protrude
through the trolley sides, potentially causing injury / harm. Wardray Premise Ltd also offer
a range of paediatric trolleys with cot bumpers for the safe transportation of children.
4
Advertisement
