Related Manuals for WARDRAY PREMISE MR1501
Summary of Contents for WARDRAY PREMISE MR1501
- Page 1 DECEMBER 2019 GEN.S.19/168d MR1501 MR Conditional Fixed Height Patient Trolley OPERATORS MANUAL...
- Page 2 Thank you for purchasing this MR Conditional product. Manufactured and tested to the highest standards it is guaranteed MR Conditional to 7.0T. Our products are manufactured by Wardray Premise Ltd to BS EN ISO 13485:2016 and are CE marked. Manufacturing address:...
- Page 3 New Safety Definitions for MRI as Defined by International Standard F2503-13 MR SAFE: An item that poses no known hazards resulting from exposure to any MR environment. MR SAFE items are composed of materials that are electrically nonconductive, non-metallic, and nonmagnetic. MR CONDITIONAL: An item with demonstrated safety in the MR environment within defined conditions.
-
Page 4: Specification
Specification The MR1501 Fixed Height Trolley is designed to be MR Conditional and is manufactured and tested to the highest standards. The MR1501 is constructed from 3 main materials, these being aluminium, brass and 316 stainless steel. The top frame, centre sections and base frame are all manufactured from aluminium, which whilst being MR compatible is also lightweight, this aids the easy movement of the trolley. - Page 5 MR1501 Trolley parts reference Handle to operate backrest Serial Number under backrest Cot sides Backrest Foot end Head end Backrest gas spring Push bar Push bar Pinch Points when lowering sides Top Frame Centre Section Base Frame Plunger Corner buffers...
- Page 6 Operating Instructions Trendelenburg The Trendelenburg action can be operated easily by placing your hands on the push bar and pulling the handle up towards you with your fingers as shown (Fig 1). Push the top down to the desired angle (Max of 13 degrees) and release handle (Fig 2). To bring the top to a horizontal position, pull the handle which will then return the top to the horizontal position.
- Page 7 Operating Instructions Cot Sides Fig 1 The trolley is fitted with raise and lower cot sides (Fig 1) these protect the patient during transportation to and from the ward. Be aware of the pinch points when lowering the cot sides. These are indicated on the trolley.
- Page 8 Operating Instructions Castors Press down firmly to lock Press down firmly to release Fig 2 Fig 1 The trolley is fitted with four 150mm diameter individually braked castors. To engage the brakes, place your foot on the front part of the brake lever (Fig 1) and push down firmly, the brake will lock in place and stop the castor from moving.
-
Page 9: Oxygen Cylinder Holder
Operating Instructions IV Pole The trolley is fitted with 4 locations for the IV pole,1 located at each corner of the trolley. A thumb screw allows the pole, both to be locked vertically for use, and horizontally for storage as shown (Fig 1 and Fig 2). Fig 2 Fig 1 The IV Pole is manufactured from 316 stainless steel, and is stamped with the serial No. - Page 10 35 Stone (223Kg/490lbs) onto the trolley. spill oil or other liquids/chemicals on the mattress. attempt to rectify any faults on the trolley without contacting Wardray Premise Ltd. use the trolley without a mattress. ...
-
Page 11: General Maintenance
If the unit is damaged please do not attempt to repair as this could invalidate your warranty and could compromise its MR integrity and therefore safety, please call or email Wardray Premise Limited: T: +44 (0) 20 8398 9911 F: +44 (0) 20 8398 8032 E-MAIL: sales@wardray-premise.com... - Page 12 10000 parts per million chlorine combined with a detergent. Alternatively, follow your local guidelines or instructions. If any of the above give cause for concern, please contact your Wardray Premise service provider. EU Declarations of Conformity and Magnetic Testing...