This Operator's Manual is an important part of your new snow thrower. It will help you assemble,
prepare and maintain the unit for best performance. Please read and understand what it says.
Safety Labels ...................................................... 3
MakingAdjustments ......................................... 14
BEFORE YOU START ASSEMBLING
YOUR NEW EQUIPMENT,
please locate the model plate on the equipment and copy the
model number and the serial number to the sample model
plate provided to the right. You can locate the model plate by
standing at the operating position and looking down at the
frame.
Please do NOT return the unit to the retailer from which it was purchased,
If you have difficulty assembling this product or have any questions regarding the controls, operation or maintenance of this unit,
you can seek help from the experts. Choose from the options below:
1. Visit www.cubcadet.ca for many useful suggestions.
2. Call an authorized dealer or Customer Support Representative at 1-800-668-1238.
3. The engine manufacturer is responsible for all engine-related issues in terms of performance, power-rating, specifications,
Warranty, and service. Depending on the engine manufacturer, more information is included in this publication or packed
separately with this product.
Please have your unit's model number and serial number ready when you call. See previous section to locate this information.
You will be asked to enter the serial number in order to process your call.
Table of Contents
Finding and Recording Model Number
Customer Support
without first contacting Customer Support.
Warranty ............................................................
Illustrated Parts Lists ....................................... 3
�
�
Need help?
Do you have a question about the Two Stage Snow Thrower and is the answer not in the manual?
Questions and answers
WHERE IS THE GEAR SHAFT ON MY STAGE 2 CLUB CADET MODEL 31BM5 CVR596
WHERE IS THE GEAR SHAFT ON A STAGE 2 CLUB CADET?
The gear (hex) shaft on a Cub Cadet Two Stage Snow Thrower is located beneath the lower frame cover. To access it, carefully pivot the snow thrower up and forward so that it rests on the auger housing, then remove the lower frame cover by taking out the two securing screws.
This answer is automatically generated