Energy Efficiency - Electrolux LKI6489NOW User Manual

Problem
Steam and condensation settle on
the food and in the cavity of the
oven.
The oven display shows "C2".
The oven display shows "F102".
The oven display shows "00:00".
The display shows an error code
that is not in this table.
15.2 Service data
If you cannot find a solution to the problem
yourself, contact your dealer or an Authorised
Service Centre.
The necessary data for the service centre is
on the rating plate. The rating plate is on the
front frame of the appliance cavity. Do not
remove the rating plate from the appliance
cavity.

16. ENERGY EFFICIENCY

16.1 Product Information according to EU Ecodesign Regulations for hob
Model identification
Type of hob
Number of cooking zones
Heating technology
38 ENGLISH
Possible cause
You left the dish in the oven for too
long.
You want to start the Pyrolysis or
Fast Heat UpDefrost function, but
you did not remove the core temper‐
ature sensor plug from the socket.
• You did not fully close the door.
• The door lock is defective.
There was a power cut.
There is an electrical fault.
We recommend that you write the data
here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)
LKI6489NOW
LKI6489NOX
Hob inside Freestanding Cooker
4
Induction
Remedy
Do not leave the dishes in the oven
for longer than 15 - 20 minutes after
the cooking process ends.
Remove the core temperature sen‐
sor plug from the socket.
• Fully close the door.
• Deactivate the oven with the
house fuse or the safety switch
in the fuse box and activate it
again.
• If the display shows "F102"
again, contact the Customer
Care Department.
Set the time of day.
Deactivate the appliance with the
house fuse or the safety switch in
the fuse box and activate it again. If
the display shows the error code
again, contact the Customer Care
Department.
.........................................
.........................................
.........................................