Part Identification Chart - ICON Health & Fitness WESLO FLEX 3.0 User Manual

PART IDENTIFICATION CHART

Use the drawings below to identify the small parts needed for assembly. The number in parentheses below each
drawing is the key number of the part. The number following the key number is the quantity needed for assembly.
Note: If a part is not in the hardware kit, check to see if it has been preassembled. Extra parts may be
included.
M8 Split M8 Washer M8 Nut (17)–2
Washer (25)–4 (24)–6
M4 x 16mm M6 x 16mm M8 x 20mm M10 x 45mm
Screw (22)–4 Screw (7)–1 Screw (9)–4 Screw (3)–2
M8 Bolt Set (12)–1
6