Internal Recording; Recording Single Track; Recording An Entire Cd; Recording A Program - Philips CDR800 - annexe 2 Manual

xp CDR800/17 eng./dr.5 09-02-2001 12:11

Internal recording

Recording a single track
Recording a single track during playback
1 Make sure the CDR(W) is absolutely free of scratches and
dust particles and insert it into the CD recorder tray.
2 Play your desired track on the CD changer.
3 Press RECORD on the set to enter the recording menu.
REC TR and the tracknumber are displayed.
4 Press either:
YES to start recording,
The arrow lights,
playback and recording start from the beginning of the
selected track and the actual recording time left starts
to count down.
or
NO to continue playback.

Recording an entire CD

High speed recording and automatic finalizing of
the current disc
1 Make sure the CDR(W) is absolutely free of scratches and
dust particles and insert it into the CD recorder tray.
2 Select the required required disc by pressing CD1, CD2 or
CD3.
3 Press COPY CD to enter into the record mode.
The arrow and the YES key start blinking.The remaining
recording time of the CDR(W), the total playing time of
the source CD and RECORD CD1 (or 2, 3) ? are
displayed.
4 Press YES to start recording and finalizing.
The arrow lights,
are shown, high speed recording and finalizing start and
the actual recording time left starts to count down.
Note: If a program was already available before pressing
COPY CD, this will be ignored.
current disc will be recorded. After finishing the recording,
is shown and the program is available again.
PROGRAM
20
Pagina 20
is shown,
RECORD IN PROGRESS
and
RECORD IN PROGRESS FINALIZE
goes off and the
PROGRAM

Recording a program

High speed recording and automatic finalizing
(optional) of the current program
1 Make sure the CDR(W) is absolutely free of scratches and
dust particles and insert it into the CD recorder tray.
2 Select and store all desired tracks in the CD changer memory
(see "Programming track numbers").
3 Press COMPILE CD to enter into the record mode.
The arrow starts blinking.The remaining recording time of
the CDR(W), the total playing time of the program and
REC PROG ? are displayed.
Note: If no program is available and you press COMPILE CD, you
enter immediately into the program menu. Start programming and
return to the record mode by pressing PROGRAM or COMPILE CD.
4 Press either:
NO to change the program.
program starts blinking. Now you can change the program
(see "Programming") and return to the record mode by
pressing COMPILE CD.
or
YES to confirm recording.
AUTO FINAL ? is displayed.
5 Press either:
YES, if the CDR(W) is to be finalized after recording,
or
NO, if the CDR(W) is not to be finalized after recording.
The arrow lights,
RECORD IN PROGRESS
recording and finalize (if selected) start and the actual
recording time left starts to count down.
Do not forget to finalize!
is shown, high speed