A-B Edit (On Cd Changer Only) - Philips CDR800 - annexe 2 Manual

Hide thumbs Also See for CDR800 - annexe 2:
Table of Contents

Advertisement

xp CDR800/17 eng./dr.5
09-02-2001 12:11
Special features
Erasing from the memory
When the text memory of your CD recorder is full, the
messages MEMORY FULL and FINALIZE DISC will be
displayed. If you still want to add a new disc to the text
memory, you have either to erase another disc from the
memory or you have to finalize another disc.
A-B Editing (on CD changer
only)
You can create a "track" by marking a passage of music
within one track on the current disc.This new "track" can
be used for recording or playing.The minimum track length
is 4 seconds.
1
Press A-B EDIT on the set.
starts blinking, TRACK and the current track
EDIT TRACK
number ? are displayed.
Rotate the ¡ EASY JOG ™ control until the desired track
2
number is displayed.
3
Press YES to confirm the selected track.
FROM A = XX : XX and the track time will be displayed.
The first 4 seconds of the track will be played
continously.The initial position of marker A is always the
start of the chosen track.
To fast forward to the desired start position press 5 or 6
0
on the set.
To fine tune the position then rotate the ¡ EASY JOG ™
0
control.
4
Press YES or A-B EDIT to confirm the position of marker a.
TO B = XX : XX and the new "track" time will be
displayed.The first 4 seconds before marker position B
until marker position B will be played continously.The
initial position of marker B is always the position of
marker A plus 4 seconds.
To fast forward to the desired stop position press 5 or 6
0
on the set.
6
Press YES or A-B EDIT to confirm the marked passage.
is shown, A-B and the track edit time are
EDIT TRACK
displayed.
The new "track" will be stored.
Press PLAY/PAUSE 2/; to play the "track".
0
Press RECORD to record the "track" (also see
0
"Recording").
26
Pagina 26
Note: A-B EDIT can also be pressed during play.The Track Edit
procedure will then start from the position where A-B EDIT was
pressed.
Clearing the A-B edit
1
Press NO during stop.
CLEAR A-B ? is displayed.
2
Press YES to clear the markers.
The markers A-B are cleared.
Note: If you open the CD changer tray the A-B edit is deleted.

Advertisement

Table of Contents
loading

Table of Contents