Philips CDR 800/17 Quick Start Manual

xp QRC CDR 800/17 eng.1
Philips Audio CD Recorder CDR 800: Getting started...

General information

This Quick Installation Card gives a rough
overview and helps to quickly start with basic
steps. Please read the supplied instruction
manual for detailed information.
Power
1
Check whether the power voltage as shown on the
type plate corresponds to your local power voltage. If
it does not consult your dealer or service
organization.
2
After all connections have been made connect
the power cord to AC MAINS ~ and to the wall
outlet.This switches on the AC power supply.
To disconnect the set from the power
completely, remove the power plug from the wall
outlet.

Demo mode

The demo mode displays various features of the set and will start automatically.
To switch off the demo mode keep STOP
0
The demo mode is cancelled permanently.
02-08-2001 12:55 Pagina 1
RECORD PLAYER
AMPLIFIER/
RECEIVER
AC MAINS CD RECORDER
DIGITAL ANALOG
L
OPTICAL
R
IN
IN
IN OUT OUT
DIGITAL
DIGITAL COAXIAL SOURCE
(CD player, DVD, DAT)
OUT
9
pressed for at least 5 seconds.
PHONO
L
R
OUT
PHONO
ANALOG
CDR/TAPE
L
L L
R
R R
IN IN
OUT IN
ANALOG
L
R
OUT
Discs for recording
Use discs with the "Digital Audio" logo only:
– CD-Audio Recordable (CDR) discs, or
– CD-Audio ReWriteable (CDRW) discs.
Do not use computer CDR(W)s as
recording would not work properly.
Discs for playback
playback standard CDRW
in: CD player compatible
disc: CD player
finalized CDR
finalized CDRW
unfinalized CDR
or CDRW
MP3 CD
Note: MP3 playback works only if the filenames end
with ".mp3".
ReWritable
Philips
CDR 800
CD Recorder only