High Speed Recording From Internal Cd Player - Philips CDR775 S Instructions For Use Manual

High speed recording from internal CD player

OPEN / CLOSE
OPEN / CLOSE PLAY / PAUSE REC
PLAY / PAUSE
STOP STOP
RECORD
TYPE
FINALIZE
ERASE
RW
ANALOG
CDR 77X AUDIO CD RECOR
PROG
SHUFFL E
During high speed recording the sound is not audible.
Preparing for high speed recording
1 Make sure that the recording disc is absolutely free of
scratches and dust particles.
2 To choose the type of recording, press REC TYPE:
once: to select 'RECORD FAST' if you wish to make a
fast recording of a disc or programmed tracks;
three times: to select 'MAKE CD' if you wish to make a
fast recording of a disc or programmed tracks
and to automatically finalize the recording. Also
see 'Finalizing CDR & CDRW discs'.
The display first shows the selection.
The f RECORD g label starts blinking. After 3
seconds the display shows the remaining CDR(W)
recording time on the left and total time of source on the
right. (every 2 seconds PRESS RECORD is displayed.)
The left-hand selection indicator is lit up.
REM REC TIME TRACK TOTAL
SYNC MANUAL RECORD
DIGITAL I CHANGER
CD
OPTICAL I
RW
ANALOG
REM REC TIME TRACK TOTAL
SYNC MANUAL RECORD
CHANGER
DIGITAL I CD
OPTICAL I
RW
ANALOG
REM REC TIME TRACK TOTAL
SYNC MANUAL RECORD
CHANGER
DIGITAL I CD
OPTICAL I
RW
ANALOG
EASY JOG
STORE/ CANCEL/
MENU
DELETE
ENTER
EXT
SOURCE
DER
PHONES
DISPLAY
SCROLL REPEAT DJ MODE
REM TRACK TIME STEP
PROG
SHUFFLE ALL
CD
REPEAT
RW
SCAN TRACK
REM TRACK TIME STEP
PROG
SHUFFLE ALL
CD
REPEAT
RW
SCAN TRACK
REM TRACK TIME STEP
PROG
SHUFFLE ALL
CD
REPEAT
RW
SCAN TRACK
• If DOES NOT FIT appears on the display, there is not
enough recording space left on the CDR(W) disc.
You can press RECORD: only complete tracks that still fit on
the CDR(W) will be recorded
or
You can press PROG to select one or more tracks for
recording (see programming):
- rotate the EASY JOG/ENTER key to the required track
number, then press the key (or ENTER on the remote
control)
or
- directly select the track number via the 10-keypad on the
remote control, then press the ENTER key to confirm your
selection and go to the next step.
Start high speed recording
1 To start recording press RECORD.
WAIT lights up. The display shows the total remaining
time for the selected recording. High-speed recording
starts. f RECORD g lights up continuously.
• To check the track number and track time, press DISPLAY.
This can be done during recording.
• Recording will stop automatically.
Note: Copy prohibited tracks will be copied analog. ANALOG
REC is displayed.
2 To stop recording manually, press STOP.
UPDATE lights up, f RECORD g goes out and
recording stops. (Minimal track length must be 4 seconds
otherwise silence will be added to the track.)
• If STOP was pressed within 3 seconds after RECORD, no
recording will take place.
After recording, the display shows UPDATE for several
seconds. The Total time indications can differ slightly.
However, no music information is lost.
Note: In this Recording mode, the Pause function is not
operative.
Important:
If you want to play the recorded CDR disc on any
regular CD player, it must first be finalized. See
finalizing discs.
Finalized CDRW discs play only on CDRW compatible
CD players.
RECORDING
19