Analog Connections; Digital Connections - Philips CDR800 - annexe 2 Manual

xp CDR800/17 eng./dr.5 09-02-2001 12:11
Installation

Analog connections

These connections are required for playback and recording via
an amplifier/receiver, equipped with an analog in- and outputs.
3
1 Connect supplied audio cable between the ANALOG
OUT-sockets on the set and the ANALOG input sockets of
the amplifier/receiver (TAPE IN, CD-R, AUX or PLAY IN).
Insert the red plugs into the R sockets, and the white plugs
into the L sockets.
2 Connect supplied audio cable between the ANALOG IN-
sockets on the set and the analog outputs of the
amplifier/receiver (CDR OUT,TAPE OUT, AUX OUT, REC
OUT etc.).
Insert the red plugs into the R sockets, and the white plugs
into the L sockets.
3 Connect all other components of your system (tape deck,
CD player, tuner, record player etc.) via their ANALOG
OUT-sockets to the appropriate analog input sockets of
the amplifier/receiver (CD IN,TUNER IN, AUX IN,
PHONO IN etc.).
Any analog device, connected to the amplifier/receiver
can now be used as recording source (AUX ANALOG).
12
Pagina 12
RECORD PLAYER
CD PLAYER
3
AMPLIFIER/
RECEIVER
1
2
CD RECORDER

Digital connections

Direct digital coaxial connection
This connection is required for direct recording from a digital
coaxial source (e.g a CD player, DVD, DAT).
CD PLAYER
3
CD RECORDER
1 Connect a digital coaxial cable between the DIGITAL IN-
socket on the set and the DIGITAL OUT socket of the
digital source.
Recording can now be done via the digital coaxial input
(AUX DIGITAL).
Direct digital optical connection
2
CD RECORDER
This connection is required for direct recording from a digital
optical source (e.g. a CD player, DVD, DAT).
1 Remove the dust caps from the digital optical connections
of both source and CD recorder. Keep the caps in a safe
place.
2 Connect an optical fibre-optic cable
between the OPTICAL IN socket of
the set and the OPTICAL OUT
socket of the source.
Make sure you insert both plugs
fully, until a click is heard.
Recording can now be done via the digital optical input
(AUX OPTICAL).
CD PLAYER