Woods SB54.30 Operator's Manual page 22

Lubrication
IMPORTANT: Perform all the maintenance section
without taking into account the hours given in the fol-
lowing cases:
• At least once a year if the snow blower is used
less than 20 hours annually.
• After each storage period.
• After each wash.
DESCRIPTION
Gearbox
Drive chain
and after each operation
Drive shaft 24 hours of operation
Bearings 24 hours of operation
Driveline
22 Owner Service
MAN1367_2023-10.indd 22 MAN1367_2023-10.indd 22
Figure 14. Lubrication
INTERVAL
Check oil lovel. If needed, add extreme pressure oil, SAE 80W90
Monthly
gear oil or equivalent
Once a year Replace Oil.
4 hours
Lubricate with chain saw lubricant.
Grease at the shear plate and the grooved section with the grease
fittings. Use a Shell Gadus S5 V100 grease or equivalent.
Grease each auger and drive shaft bearings and the grease fitting of
the shear plate. Use a Shell Gadus S5 V100 grease or equivalent.
Grease each universal joint. Separate the sliding parts and cover
8 hours
each with grease.
16 hours Oil the quick connect yokes.
REQUIRED LUBRICATION
MAN1367
( 10/16/2023 )
10/18/23 10:15 AM 10/18/23 10:15 AM