Kenwood TK-3101 Instruction Manual page 8

CHANGING THE PROGRAMMED FREQUENCIES,
2 Press the PTT switch.
channel.
To select "0", press and hold the PTT switch until a 1 second tone
sounds (approximately 2 seconds).
Pressing the PTT switch more than 8 times (7 times for the Spanish
market model) will cause an error tone to sound, and no value will be
selected.
Wait for 2 seconds to hear the beep
pattern of the number you selected.
Press the Monitor key to complete
the setting.
e The red LED blinks twice.
Press the Monitor key again to
confirm the beep pattern of the
selected frequency number.
Repeat steps 3 to 7 to set up another