Table of Contents
Advertisement
Available languages
Available languages
Thermal Protection Mode
In cases of overheating, the articulating head LEDs
lumen output automatically switches to the next lower
brightness setting. If the temperature continues to increase,
the light box will power off until a normal operating
temperature is reached.
Carry Handle (Fig. A)
This DWST08062 has a built in carry handle
you to carry the DWST08062 when not attached to a
ToughSystem® 2.0 storage box.
Suspending the Adjustable Work Light
(Fig A, G)
CAUTION: When the adjustable work light hangs by the
hang hook, do not shake the adjustable work light or the
object from which it hangs. Do not hang the adjustable
work light from any electrical wires or anything that is not
secure. Personal injury or property damage may occur.
CAUTION: Only use the hang hook for hanging the
adjustable work light as shown in Fig. A, G. The hang
hook is not intended to support additional weight.
Do not attach or hang anything additional to the
adjustable work light or risk of breakage may occur.
CAUTION: Do not use the hang hook to reach with or
to support your weight in any situation.
CAUTION: Do not stand underneath the adjustable
work light when it is mounted overhead. Serious
personal injury or damage to the adjustable work light
may result if the adjustable work light falls.
CAUTION: Do not mount the adjustable work light to
the ceiling.
hang hook
The hang hook
10
may be used to suspend the adjustable
work light
1
from 2x4 lumber or pipes up to 2-1/2" (64 mm)
diameter.
1. The hang hook
10
folds out from under adjustable
work light
1
. Be sure to fully extend the hang hook
before using.
2. To store the hang hook
recess and ensure the hang hook
hang hook clasp
11
Mounting the Adjustable Work Light Using
the Threaded Accessory Mounts (Fig. A, H)
WARNING: Since accessories, other than those offered
by D
WALT, have not been tested with this product, use
e
of such accessories with this tool could be hazardous.
To reduce the risk of injury, only D
accessories should be used with this product.
If you need any assistance in locating any accessory, please
contact your nearest D
WALT service center or go to
e
www.D
WALT.com.
e
that allows
9
10
fold it into the hang hook
10
clips into the
.
WALT recommended
e
The DWST08062 is equipped with 1/4 x 20
5/8 x 11
17
3
,
5
to accommodate current or future D
1. Place the mounting screw of the accessory into the
appropriate threaded mount
accessory to the adjustable work light
nOTE: Follow the directions included with
the accessory.
2. Ensure the light is securely attached.
MAINTENANCE
WARNING: To reduce the risk of serious personal
injury, turn unit off and disconnect it from power
source and remove the battery pack before making
any adjustments or removing/installing attachments
or accessories. An accidental start-up can cause injury.
Your D
WALT product has been designed to operate over
e
a long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon proper
care and regular cleaning.
Storage and Transportation
•
Always store with battery removed!
•
Avoid using the DWST08062 outdoors or transporting in an
open vehicle.
•
Do not use in rain. Do not expose to rain.
•
Store indoors.
•
Store the DWST08062 in a place that is as cool and dry
as possible.
•
Store the DWST08062 in a place where it cannot be
accessed by children or unauthorized persons.
•
Check the DWST08062 for damage before use after long
periods of storage.
Cleaning
WARNING: Never use solvents or other harsh
chemicals for cleaning the non-metallic parts of the
tool. These chemicals may weaken the plastic materials
used in these parts. Use a cloth dampened only with
10
water and mild soap. Never let any liquid get inside the
tool; never immerse any part of the tool into a liquid.
female threaded mount. This threaded mount is
WALT accessories.
e
16
English
16
and
,
and secure the
17
.
1
9
Advertisement
Table of Contents
