Set Starting Position; Regional Settings - Uniden TRAX4310 Owner's Manual

4.3.5 Set starting position

For normal navigation, all routes are planned from the current position. In order to
check future routes, you can turn off the GPS receiver, and set the starting point of
the route to a different location than the current GPS position.
The procedure is explained here: page 72.

4.3.6 Regional settings

These settings allow you to customise the application for your local language,
measurement units, time and date settings and formats, as well as to choose the
voice guidance profile you prefer.
Button
This button displays the current written language of the
user interface. By tapping the button, you can select a new
language from the list of available languages. The application
will restart if you change this setting; you are asked to
confirm this.
This button shows the current voice guidance profile. By
tapping the button, you can select a new profile from the list
of available languages and speakers. Tap any of these to
hear a sample voice prompt. Just tap OK when you have
selected the new spoken language.
See below.
Select the virtual keyboard to be used when searching for an
address or when entering a name to a Favourite destination.
Various international keyboard layouts are available.
Description
Page 97